6 Tests To See How Fit You Really Are


‘Being fit’ is a term used in many ways but measuring how fit you actually are is largely dependent on the activities you do. That’s when you need to use a recognized fitness test. We, humans, tend to gravitate towards things we’re good at, particularly when it comes to ticking the weekly exercise box. After all, it’s much easier – and frankly more rewarding – to spend an hour a day sweating at an activity you have a talent for than struggling over something you suck at. But getting stuck doing the same thing week in, week out could mean you’re less ‘fit’ than you really think.

Ask any CrossFit competitor – the sport that claims the crown of the world’s fittest people – and they’ll tell you there’s more to all-round fitness than being able to run or ride fast in a straight line, do dozens of burpees or deadlift your bodyweight. So how do you spot the areas that might need improvement? We’ve pulled together a set of simple fitness tests you can take to benchmark the most important areas: strength, endurance, speed, and mobility. Time to see how fit you really are.

Harvard Step Test

What it reveals: General cardio fitness based on your ability to recover after a strenuous exercise. Take your resting pulse rate, arm up for 10 mins, then perform step-ups onto a 50cm platform at a consistent rate of 30 steps per minute for five minutes or until exhaustion. Use a metronome to keep time (you can download simple metronome apps or some fitness trackers have this feature built-in). Exhaustion is when you’re unable to maintain the stepping rate for 15 seconds. At the end of the test, you immediately sit down and record the number of heartbeats in the 30-second intervals between 1 and 1.5 minutes, 2 and 2.5 minutes, and 3 and 3.5 minutes.

Calculating your results: Results are calculated using the total time it took you to reach exhaustion in seconds, multiplied by 100, and then divided by the sum of the heartbeats in the recovery periods multiplied by two.

Formulae: Test duration in seconds x 100) / (Sum of heartbeats in the recovery periods x 2) How fit are you?
Excellent – 96 or above; Good – 83 – 96; Average – 68 – 82; Low Average – 54 – 67; Poor – 54 or below.

The Bleep Test

What it reveals: This test is used to estimate an athlete’s aerobic capacity, a measure of the ability of the heart and lungs to get oxygen to the muscles during all-out, maximal exercise. Place two markers 20 meters apart and then perform continuous shuttle runs between the markers, reaching each point before a timed beep. The beeps increase in speed every minute to indicate a new level. If you fail to reach a marker in time you’re given one warning. The test is complete if you fail to hit the mark before the beep for a second time.

Calculating your results: The standard Bleep Test has 21 levels in total. Record the last level completed. How fit are you?
Men / Women – Excellent 13 or above / 12 or above; Very good 11- 13 / 10 – 12; Good 9 – 11 / 8 – 10; Average 7 – 9 / 6 – 8; Poor 5 – 7 / 4 – 6; Very poor 5 or below / 4 or below.

1 Rep Max Test (1RM) Strength Test

What it reveals: You can do one rep max test for everything from bench press, squat, and deadlift to bicep curls, shoulder press, leg curl, and so on. This is used to reveal the muscle strength of a targeted muscle or muscle group. After a warm-up, choose an achievable weight for your target exercise and perform one rep. Following several minutes rest to avoid fatigue, increase the weight, and repeat. Continue until you reach a weight where you can no longer complete one full rep or the exercise with correct form.

Calculating your results: Make a note of the maximum weight. How fit are you?
One Rep Max tests are best used to benchmark your personal progress and fitness improvement over time, however, there are online calculators that let you compare your performance to others with similar bodyweight.

Flying 30 Meter Speed Test

What it reveals: This test reveals your maximum running speed and can be used to set target interval times for running speed work across 100m, 200m, 400m, and 800m. Place markers at 0m, 30m, and 60m along a straight line, ideally on a running track but otherwise on a flat surface. After a short warm-up, start on the 0m mark and use the first 30m section to power yourself sprinter-style, aiming to hit top speed when you hit the 30m marker. Maintain that speed to the 60m marker and record the time it takes to run the second 30m section. Repeat this test twice and record the fastest time.

Calculating your results: The fastest of the two times from the 30m marker to the 60m marker is your test result. How fit are you?
Unless you have your sights set on Olympic sprint glory and you fancy seeing how you compare to the elites, this test is best used as an individual benchmark as there’s not much data for the average public to draw useful comparisons. Testing this 8-12 weeks apart after a period of training will help you see if you’re improving.

Balance Star Excursion Test

What it reveals: This test can be used to assess your dynamic posture control, that’s how well you can maintain a good center of gravity and balance when you move. This can be a good indicator or mobility but it can also reveal injuries, for example, if one score comes up significantly lower than on previous tests. Lay down four 120cm lengths of marking tape in a star or asterisk formation on the floor. The lines should be placed at 45-degree angles with each piece of tape intersecting in the middle. With bare feet or socks but no shoes, stand on one foot on the center of the star with your hands on hips. Then reach with one foot as far as you can along one line while keeping your standing foot completely flat on the floor. The reaching foot should tap the floor lightly and where it touches should be marked. Repeat for each line and complete a full circuit. Do this test three times. The reaching foot must not touch down too heavy and return to the center each time. The standing leg must also not move.

Calculating your results: Once the three circuits are complete, all the distances reached to the nearest half centimeter are recorded. Calculate the average distance in each direction. How fit are you? Another test that’s designed to provide you with a benchmark score that you can monitor, this would also highlight any areas for concern. For example, if one reach is significantly lower than the score with the opposite leg, this could suggest there’s an issue.

Sit And Reach Test

What it reveals: This simple assessment measures lower back and hamstring flexibility, a great indicator of overall mobility. You can buy specialized equipment but it’s easy to make your own test box or you can create the same conditions using your home stairs and a ruler. To create your own box, get a 30cm tall box and either a meter rule or a measuring tape. Fix the tape or the rule so that 26cm extends over the front edge of the box towards you and the 26-cm mark is at the edge of the box. Slip off your shoes and sit in a position as if you’re going to do a seated hamstring stretch, with your feet flat against the box. Lean forward slowly, keeping your legs straight and reach as far along the ruler as you can. Mark where you reach on the tape and repeat the test three times.

Calculating your results: Get your results by taking an average of your three test scores in centimeters. How fit are you?
Men / Women; Excellent Above 34 / Above 37; Above average 28 – 34 / 33 – 36; Average 23 – 27 / 29 – 32; Below average 16 – 22 / 23 – 28; Poor Below 16 / Below 23.


Use your ← → (arrow) keys to browse

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: